IEEE REGION 8, RUSSIA SECTION CAS CHAPTER
IEEE REGION 8, RUSSIA SECTION TEM/GRS/ITSS JT. CHAPTER
INSTITUTE OF RADIO AND INFORMATION SYSTEMS (IRIS)
MOSCOW AUTOMOBILE AND ROAD CONSTRUCTION STATE TECHNICAL UNIVERSITY (MADI)
Conference title: 2022 Intelligent technologies and electronic devices in vehicle and road transport complex
IEEE Conference #56496
From 10 to 11 November 2022
Location: Moscow Automobile and Road Construction State Technical University (MADI)
64, Leningradsky prospect, Moscow, Russia
Moscow Automobile and Road Construction State Technical University (MADI) was founded on the 13th December 1930. Now MADI is one of the largest universities in Russia, the leading research and educational center for training bachelors, specialists, masters and researchers in various fields: road, bridges and airport construction, operation and service of transport, economics and management in transport and construction, automated systems of management, traffic safety and management. Now at MADI there are more than 140 doctors of science, 500 full and associate professors, who teach more than 16000 undergraduate, graduate and postgraduate students. Among MADI’s alumni there are government officials and researchers, businessmen and university professors of many countries. For its contribution to training of qualified specialists MADI was awarded Medal of Friendship of Vietnam (1988) and Laos (2015). MADI was the first Russian university to send in 2006 its team to Formula Student competition and from that time student engineering projects have resulted in successful performance at various international competitions. MADI has scientific and educational cooperation programs with foreign universities and 2016 is the second year when some MADI graduates will get double degree of both MADI and Otto Von Guericke University of Magdeburg. MADI’s mission is research and education to ensure availability of high-quality, efficient and safe transport and to increase vehicle-to-population ratio, which is a crucial factor for Russian transport system, providing its integrity.
Submission dates (Abstract and Full Paper at the same time):
Regular submission: 05 August 2022
Late submission (with additional payment): 26 August 2022
Last chance submission (with a BIG extra charge): 16 September 2022
Notification of Acceptance date: 20 September 2022
Author Registration, Final paper Submission and Payment date: 21 October 2022
CALL FOR PAPERS
CF-01: 12.000 рублей — (Regular submission: 05 August 2022) Регистрация для участников из РФ и стран СНГ — членов IEEE (одна статья на один регистрационный номер IEEE для первого автора)
CF-02: 15.000 рублей — (Regular submission: until 05 August 2022) Регистрация для участников из РФ и стран СНГ
CF-03: 14.000 рублей — (Late submission with additional payment: until 26 August 2022) Регистрация для участников из РФ и стран СНГ — членов IEEE (одна статья на один регистрационный номер IEEE для первого автора)
CF-04: 17.000 рублей — (Late submission with additional payment: until 26 August 2022) Регистрация для участников из РФ и стран СНГ
CF-05: 20.000 рублей — (Last chance submission with a BIG extra charge: until 16 September 2021) Регистрация для участников из РФ и стран СНГ
CF-06: 180 USD – Graduate and postgraduate students as sole authors without co-authors or a team of authors consisting of only students (Regular submission and Late submission)
CF-07: 200 USD – Registration for IEEE members (Regular submission and Late submission, one article per IEEE registration number for the first author)
CF-08: 250 USD – Full registration (Regular submission and Late submission)
CF-09: 300 USD – Last chance submission with a BIG extra charge: until 16 September 2022 — Full registration
If the participants request cancellation and refund due to personal reasons, the following refund policy applies.
* 60 days ahead of the conference: 70% of payment refund
* 30-60 days ahead of the conference: 50% of payment refund
* Within 30 days ahead of the conference: no refund
* The organizing committees reserves the right to change the dates and place of the conference due to force majeure.
* Losses thus incurred from the force majeure events shall not be liabled and refunds policy shall not apply as well.
IEEE takes the protection of intellectual property seriously. Accordingly, all submissions are filtered by CrossCheck, a powerful plagiarism detection software system. By submitting your work you agree to allow IEEE to screen your work. When plagiarism is detected, penalties can be severe and may include strict banning from publishing in all IEEE titles. Please consult http://www.ieee.org/documents/opsmanual.pdf Section 8.2.4. to read about IEEE plagiarism policies. For more information please visit: http://www.crossref.org/crosscheck/index.html
About the Event
INTERNATIONAL CONFERENCE «2022 INTELLIGENT TECHNOLOGIES AND ELECTRONIC DEVICES IN VEHICLE AND ROAD TRANSPORT COMPLEX»
For 80 years (held since 1942), MADI has been annually holding an international scientific-methodological and research conference «Intelligent technologies and electronic devices in vehicle and road transport complex». During this period, the conference has become larger and more significant. MADI wants to allocate several sections and subsections to a higher level. These areas are: integrated automated control systems in the sectors of the transport and road complex; automation of production processes; organization and traffic safety.
The presentations are made by the scientists and developers from: Russia, Germany, Italy, Sweden, Finland, Poland, Brazil, Belarus, Azerbaijan, Kazakhstan, Kyrgyzstan.
IEEE Region 8, Chair of Russia Section CAS Chapter and President of Institute of Radio and Information Systems (IRIS), Senior member IEEE, Prof. Oleg V. Varlamov is a member of the program committee and organizes the work of conference section “Advanced digital intelligent technologies, robotic and big data systems, machine learning and artificial intelligence”.
Chair of Russia Section TEM/GRS/ITSS Jt. Chapter, member IEEE, Svetlana Dymkova organizes the work of conference section “Intelligent transport systems and monitoring the state of road network objects” and Program Committee Coordinator.
The papers which are discussed at the conference can be divided into the following areas:
- Advanced digital intelligent technologies, robotic and big data systems, machine learning and artificial intelligence
- Intelligent transport systems and monitoring the state of road network objects
- Electronic driver assistance systems. Self-driving cars and electric vehicles
- Intelligent and digital systems for design, management and monitoring during the construction and operation of road infrastructure
- Creation and service of highly efficient road-building, airfield and hoisting-and-transport equipment based on information technologies, robotic and mechatronic systems
- Technology and Engineering Management (management sciences and practices required for defining, implementing, and managing engineering and technology)
7. Advanced Technologies and Strategies for Transportation Systems
8. Peculiarities of data exchange in cooperative ITS.
9. Electrical and electronic engineering pedagogy
Chair of Russia Section CAS Chapter and President of Institute of Radio and Information Systems (IRIS), Senior member IEEE, Doctor of Sciences (Engineering), Prof. Oleg V. Varlamov in cooperation with Chair of Russia Section TEM/GRS/ITSS Jt. Chapter, member IEEE, Svetlana Dymkova appoints the conference committee chairs and other key members.
Keywords: Intelligent technologies, Machine learning, Robotic and big data systems, artificial intelligence, Electronic devices in vehicle and road transport complex, Technology and Engineering Management, Electrical and electronic engineering pedagogy.
Conference will produce a publication.
Event Conduct and Safety Statement Language:
IEEE believes that science, technology, and engineering are fundamental human activities, for which openness, international collaboration, and the free flow of talent and ideas are essential. Its meetings, conferences, and other events seek to enable engaging, thoughtprovoking conversations that support IEEE’s core mission of advancing technology for humanity. Accordingly, IEEE is committed to providing a safe, productive, and welcoming environment to all participants, including staff and vendors, at IEEE-related events.
IEEE has no tolerance for discrimination, harassment, or bullying in any form at IEEE-related events. All participants have the right to pursue shared interests without harassment or discrimination in an environment that supports diversity and inclusion.
Participants are expected to adhere to these principles and respect the rights of others. IEEE seeks to provide a secure environment at its events. Participants should report any behavior inconsistent with the principles outlined here, to on site staff, security or venue personnel, or to firstname.lastname@example.org.
Organizers and Sponsors of the Conference
- IEEE REGION 8, RUSSIA SECTION CAS CHAPTER
- IEEE REGION 8, RUSSIA SECTION TEM/GRS/ITSS JT. CHAPTER
- INSTITUTE OF RADIO AND INFORMATION SYSTEMS (IRIS)
- MOSCOW AUTOMOBILE AND ROAD CONSTRUCTION STATE TECHNICAL UNIVERSITY (MADI)
Conference Publication Program Coordinator
Subjects of the conference
The main areas of the conference «Intelligent technologies and electronic devices in vehicle and road transport complex» advanced digital intelligent technologies, robotic and big data systems, machine learning and artificial intelligence; intelligent transport systems and monitoring of the road network state objects; electrical equipment of cars and electric vehicles; digital technologies in logistics; intelligent technologies for the creation and operation of special-purpose vehicles.
Field of interest:
- Communication, Networking and Broadcast Technologies
- Components, Circuits, Devices and Systems
- Engineering Profession
- Fields, Waves and Electromagnetics
- Power, Energy and Industry Applications
- Robotics and Control Systems
Structure of the technical program committee
Chairman of the Program Committee
Program Committee Coordinator
Technical program committee:
Chairman of the Program Committee
Didmanidze O.N., Academician of the Russian Academy of Sciences, Dr. Tech. Sciences, professor
1-st Vice-Chairman of the Program Committee
Karelina M.Yu., Doctor of Technical Sciences, Doctor of Pedagogical Sciences, vice-rector on scientific work, head. Department «Details of Machines and the Theory of Mechanisms», MADI
2-nd Vice-Chairman of the Program Committee
Prikhodko V.М., Corresponding Member of the Russian Academy of Sciences, Doctor of Technical Sciences, professor, MADI
Program Committee Coordinator
Svetlana S. Dymkova, Conference coordinator, Institute of Radio and Information Systems (IRIS), Member of IEEE Geoscience and Remote Sensing Society and IEEE Circuits and Systems Society
Members of the program committee
Gaidar S.M., Doctor of Technical Sciences, professor, head. Department “Materials Science and Technology of Mechanical Engineering”, Russian State Agrarian University – Moscow Timiryazev Agricultural Academy
Varlamov O.V., Doctor of Technical Sciences, professor, Chair of Russia Section CAS Chapter, Senior member IEEE
Shevgunov T.Ya., IEEE Region 8, Chair of Russian Section Chapter MTT/ED, Senior member IEEE
Ivanov A.M., Doctor of Technical Sciences, professor, head. Department «Automobiles», MADI
Kozlovsky V.N., Doctor of Technical Sciences, professor, head. Department «Theoretical and General Electrical Engineering» Samara State Technical University
Ostroukh A.V.,Doctor of Technical Sciences, professor, MADI
Silyanov V.V., Doctor of Technical Sciences, professor, MADI
Sova A.N. — Doctor of Technical Sciences, professor, head. Department «Transport Facilities», MADI
Trofimenko Yu.V., Doctor of Technical Sciences, professor, head. Department «Engineering ecology» MADI
Shatrov M.G., Doctor of Technical Sciences, professor, head. Department «Heat Engineering and Tractor Engines» MADI
Yashina M.V., Doctor of Technical Sciences, Cand. physical-mat. Sciences, head. Department of «Higher Mathematics» MADI, IEEE member
Girma Gebresenbet, professor, Department of Energy and Technology, Swedish university of agricultural sciences
Dzhumanov R.B. — Ph.D. project engineer of the US Federal Highway Administration (FHWA)
Matkerimov T.Y., Doctor of Technical Sciences, professor, Academician of the Engineering Academy of the Kyrgyz Republic (IA KR), Academician of the International Academy of Pedagogical Education (IANPO), Dean of the Faculty of Transport and Mechanical Engineering of Kyrgyz State Technical University named after I. Razzakov, Bishkek, Kyrgyzstan
Slawomir Makowski, Doctor of Technical Sciences, Coordinator of Cooperation Programs, Associate Professor of the Gdansk Polytechnic University, Gdansk, Poland
Hoang Duc Quang, Ph.D. Southern Branch of the Russian-Vietnamese Tropical Scientific Research Technological Center, Vietnam, Ho Chi Minh City
Georgi Popov, PhD, Assoc. Prof, Technical University – Sofia, Bulgaria
Petar Kolev, Doctor of Technical Sciences, professor, Vice Rector of Research and International Relations, Todor Kableshkov University of Transport, Sofia, Bulgaria
Organizing Committee Members
Efimenko D.B. (Chairman), Doctor of Technical Sciences, professor, acting rector of MADI
Nizamov R.K. (Vice-Chairman) , Doctor of Technical Sciences, professor, rector of Kazan State University of Architecture and Construction
Varlamov O.V. (Vice-Chairman), Doctor of Technical Sciences, Chairman of the Institute of Radio and Information Systems, IRIS, Senior member IEEE
Vasiliev Yu.E., Doctor of Technical Sciences, professor, head. Department «Road building materials» MADI
Vdovin E.A., Cand. Tech. Sciences, Associate Professor, Vice-Rector on Research, head. Department «Roads, bridges and tunnels» of Kazan State University of Architecture and Construction
Demyanushko I.V., Doctor of Technical Sciences, professor, head. Department «Construction Mechanics», MADI
Evtyukov S.A., Doctor of Technical Sciences, professor, head. Department “Ground Transport and Technological Machines”, SPSUACE
Lazarev Yu.G., Doctor of Technical Sciences, professor, SPbPU
Novikov A.N., Doctor of Technical Sciences, professor, director of the Polytechnic Institute named after N.N. Polikarpov, head. Department «Service and repair of machines», Orel State University
Novikov I.A., Doctor of Technical Sciences, Associate Professor, Director of the Transport and Technological Institute of BSTU named after V.G. Shukhov
Pospelov P.I., Doctor of Technical Sciences, professor, head. Department “Research Methods and Road Design”, MADI
Solntsev A.A., professor, head. Department “Operation of motor transport and car service”, MADI
Full Paper are being reviewed (Blind review) Estimated number of submitted papers: 150 Сriteria for reviewers to evaluate submissions 1. All the papers, submitted for publication by the Program Committee. 2. Review process is anonymous for the reviewers as well as for the author. 3. After reviewing the paper may be rejected, sent to the author for revision, or accepted for publication. 4. The review should include: — General evaluation of the paper’s content and principal judgment on whether it could be published; — The specific enumeration of errors in the methodology and tools (if any); — Suggestions for improving the text. 5. Upon receipt of an unfavorable verdict of the reviewer the paper is discussed on the program committee meeting, which makes a decision on rejection of the article or the need for further review by an independent expert. 6. In case of paper’s rejection, the author sent a notification letter. 7. The procedure for review and approval of articles is from 1 to 2 months. 8. All reviewers are acknowledged experts on the subject of peer-reviewed materials. We are not using student reviewers. Every participant pays arrangement fee. Besides, the Conference doesn’t allows distance participation and if the speaker is absent, he or she will lost the ability of the report to the next conference.
Full Paper are being reviewed (Blind review)
Estimated number of submitted papers: 150
Сriteria for reviewers to evaluate submissions
1. All the papers, submitted for publication by the Program Committee.
2. Review process is anonymous for the reviewers as well as for the author.
3. After reviewing the paper may be rejected, sent to the author for revision, or accepted for publication.
4. The review should include:
— General evaluation of the paper’s content and principal judgment on whether it could be published;
— The specific enumeration of errors in the methodology and tools (if any);
— Suggestions for improving the text.
5. Upon receipt of an unfavorable verdict of the reviewer the paper is discussed on the program committee meeting, which makes a decision on rejection of the article or the need for further review by an independent expert.
6. In case of paper’s rejection, the author sent a notification letter.
7. The procedure for review and approval of articles is from 1 to 2 months.
8. All reviewers are acknowledged experts on the subject of peer-reviewed materials.
We are not using student reviewers.
Every participant pays arrangement fee. Besides, the Conference doesn’t allows distance participation and if the speaker is absent, he or she will lost the ability of the report to the next conference.
1. All files should be submitted as a MS Word document.
2. Papers should be between 15000 and 20000 characters (incl. spaces).
3. Paper Title to be submitted in English. A title of not more than 15 words should be provided.
4. Author Details (in English)
Details should be supplied on the Article Title Page including:
* Full name of each author
* Affiliation of each author
* Full postal address of the affiliation
* E-mail address of each author
Structured Abstract (in English and native language)
Abstract should be: informative (no general words), original, relevant key content and research findings); structured, concise (between 100 and 150 words).
* Purpose (mandatory)
* Design/methodology/approach (mandatory)
* Findings (mandatory)
* Research limitations/implications (if applicable)
* Practical implications (if applicable)
* Social implications (if applicable)
* Originality/value (mandatory)
It is appropriate to describe the research methods/methodology if they are original or of interest for this particular research. For papers concerned with experimental work describe your data sources and data procession technique.
Describe your results as precisely and informatively as possible. Include your key theoretical and experimental results, factual information, revealed interconnections and patterns. Give special priority in your abstract to new results and long-term impact data, important discoveries and verified findings that contradict previous theories as well as data that you think have practical value.
Conclusions could be associated with recommendations, estimates, suggestions, hypotheses described in the paper.
Use the language typical of research and technical documents to compile your abstract and avoid complex grammatical constructions. The text of the abstract should include key words of the paper.
Keywords (in English)
Please provide about 5 keywords on the Article Title Page, which encapsulate the principal topics of the paper.
All figures should be of high quality (300 dpi), legible and numbered consecutively with arabic numerals. All figures (charts, diagrams, line drawings, web pages/screenshots, and photographic images) should be submitted in electronic form preferably in color as separate files, that match the following parameters:
References to other publications must be in IEEE style and carefully checked for completeness, accuracy and consistency.
1. All submitted papers are subject to strict peer-review process by at least two international reviewers that are experts in the area of the particular paper.
2. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language.
3. The possible decisions include acceptance, acceptance with revisions, or rejection.
4. If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted. Rejected articles will not be re-reviewed.
5. Papers may be rejected without review if they are obviously not suitable for publication.
6. The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
7. A paper should contain sufficient detail and references to permit others to replicate the work.
8. Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
9. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
10. All sources of financial support for the project should be disclosed.
Submitted papers should not have been published before in their current or substantially similar form, or be under consideration for publication with another journal. All authors submitting their works acknowledge that they have disclosed all and any actual or potential conflicts of interest regarding authorship and publication of the work and will indemnify the publisher against any breach of such warranty. For ease of dissemination and to ensure proper policing of use, papers and contributions become the legal copyright of the publisher unless otherwise agreed.
When reproducing tables, figures or excerpts (of more than 400 words) from another source, it is expected that:
1. Authors obtain the necessary written permission in advance from any third party owners of copyright for the use in print and electronic formats of any of their text, illustrations, graphics, or other material, in their manuscript. Permission must also be cleared for any minor adaptations of any work not created by them.
2. If an author adapts significantly any material, the author must inform the copyright holder of the original work.
3. Authors obtain any proof of consent statements.
4. Authors must always acknowledge the source in figure captions and refer to the source in the reference list.
5. Authors should not assume that any content which is freely available on the web is free to use. Authors should check the website for details of the copyright holder to seek permission for re-use.
Verbatim copying of more than 10 per cent of another person’s work without acknowledgement, references or the use of quotation marks.
Improper paraphrasing of another person’s work is where more than one sentence within a paragraph or section of text has been changed or sentences have been rearranged without appropriate attribution. Significant improper paraphrasing (more than 10 per cent of a work) without appropriate attribution is treated as seriously as verbatim copying.
Re-using parts of a work without attribution
Re-use of elements of another person’s work, for example a figure, table or paragraph without acknowledgement, references or the use of quotation marks. It is incumbent on the author to obtain the necessary permission to reuse elements of another person’s work from the copyright holder.
Our requirement is that all authors sign a copyright form that clearly states that their submitted work has not been published before. If elements of a work have been previously published in another publication, the author is required to acknowledge the earlier work and indicate how the subsequent work differs and builds upon the research and conclusions contained in the previous work. Verbatim copying of an author’s own work and paraphrasing is not acceptable and we recommend that research should only be reused to support new conclusions.
We recommend that authors cite all previous stages of publication and presentation of their ideas that have culminated in the final work, including conference papers, workshop presentations and listserv communications.
We take all cases of plagiarism very seriously being aware of the potential impact an allegation of plagiarism can have on a researcher’s career. Therefore, we have procedures in place to deal with alleged cases of plagiarism.
In order for us to take an unbiased approach, we investigate each case thoroughly, seeking clarification from all affected parties. If we are approached by a third party with an allegation of plagiarism, we would always seek a response from the original author(s) or copyright holder(s) before we decide on a course of action. We will not be influenced by other parties and will form our decisions in an unbiased and objective manner.
Editors are not obliged to discuss individual cases of alleged plagiarism with third parties. We reserve the right not to proceed with a case if the complainant presents a false name or affiliation or acts in an inappropriate or threatening manner towards editorial staff.