Журнал «Методические вопросы преподавания инфокоммуникаций в высшей школе» №1-2023

Опубликовано | Автор:

Бойченко И.В., Платунина Г.П., Гущина Л.И.
ИННОВАЦИОННЫЕ ПОДХОДЫ К ОБРАЗОВАНИЮ стр. 4

Борисов М.Д., Волков Д.В., Монакова А.В., Яновский А.С.
РАЗРАБОТКА МЕТОДИКИ ВЫПОЛНЕНИЯ ЛАБОРАТОРНОЙ РАБОТЫ
ПО ИЗУЧЕНИЮ СТОЯЧИХ ВОЛН В РЕЗОНАНСНОЙ ТРУБЕ
И ИНТЕРМОДУЛЯЦИОННЫХ ИСКАЖЕНИЙ стр. 9

Ванина М.Ф., Ерохин А.Г., Тутова Н.В., Фролова Е.А.
ВОЗМОЖНОСТИ ИСПОЛЬЗОВАНИЯ ОТЕЧЕСТВЕННЫХ ОПЕРАЦИОННЫХ
СИСТЕМ В СОВРЕМЕННОМ ВЫСШЕМ ЭКОНОМИЧЕСКОМ ОБРАЗОВАНИИ стр. 15

Гадасин Д.В., Назаренко С.С., Тремасова Л.А.
ОСОБЕННОСТИ ПРОВЕДЕНИЯ ПРАКТИЧЕСКИХ ЗАНЯТИЙ ПО ДИСЦИПЛИНЕ
«ПРИНЦИПЫ ПОСТРОЕНИЯ СИСТЕМ УПРАВЛЕНИЯ БАЗАМИ ДАННЫХ И ЗНАНИЯ» стр. 21

Зуйкова Т.Н.
ОПЫТ ПРИМЕНЕНИЯ СИСТЕМНОГО ПОДХОДА В КУРСОВОМ ПРОЕКТИРОВАНИИ В ВУЗЕ стр. 32

Каберова А.Р.
МЕТОДИЧЕСКИЕ ОСОБЕННОСТИ КУРСОВОГО ПРОЕКТИРОВАНИЯ ПО ДИСЦИПЛИНЕ «БИЗНЕС-ПЛАНИРОВАНИЕ В ИНФОКОММУНИКАЦИОННЫХ КОМПАНИЯХ»
У БАКАЛАВРОВ НАПРАВЛЕНИЯ 38.03.01 ЭКОНОМИКА,
ПРОФИЛЬ «ЭКОНОМИКА И ОРГАНИЗАЦИЯ IT БИЗНЕСА» стр. 38

Кораблева Е.В.
МЕТОДИЧЕСКИЕ ПРЕИМУЩЕСТВА СИНЕРГЕТИЧЕСКОГО ПОДХОДА В ПРОФЕССИОНАЛЬНОМ ОБРАЗОВАНИИ стр. 44

Королев И.В., Королева С.А., Горячева Н.Н.
ПРИМЕНЕНИЕ СОРЕВНОВАТЕЛЬНЫХ ДИСЦИПЛИН В МОСКОВСКОМ ТЕХНИЧЕСКОМ УНИВЕРСИТЕТЕ СВЯЗИ И ИНФОРМАТИКИ В РАМКАХ ПРОГРАММЫ ГТО стр. 48

Курилин А.В.
БРАХИСТОХРОНА И НЕИНТЕГРИРУЕМЫЕ ЗАДАЧИ АНАЛИТИЧЕСКОЙ МЕХАНИКИ стр. 55

Семенов О.В.
МАГНИТОФОН «МАГ-2» И ЕГО РАЗНОВИДНОСТИ стр. 62

Крейнделин В.Б., Фриск В.В., Степанова А.Г.
МОДЕЛИРОВАНИЕ ЭЛЕКТРИЧЕСКИХ ПРОЦЕССОВ НА ПЕРСОНАЛЬНОМ
ЛАБОРАТОРНОМ СТЕНДЕ стр. 72

Антонова В.М., Богомолов В.Е., Маликова Е.Е.
МЕТОДИКА ПРЕПОДАВАНИЯ ДИСЦИПЛИНЫ «ИНЖЕНЕРНАЯ
И КОМПЬЮТЕРНАЯ ГРАФИКА» В СОВРЕМЕННЫХ УСЛОВИЯХ стр. 76

Скачать Содержание номера в pdf>>>

About TIRVED 2021

Опубликовано | Автор:

Извините, этот техт доступен только в “Американский Английский”. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

INTERNATIONAL CONFERENCE

Conference title: 2021 Intelligent technologies and electronic devices in vehicle and road transport complex

Conference Record #53476

Template IEEE

PROGRAMM

From 11 to 12 November 2021

Location: Moscow Automobile and Road Construction State Technical University (MADI)
64, Leningradsky prospect, Moscow, Russia

Moscow Automobile and Road Construction State Technical University (MADI) was founded on the 13th December 1930. Now MADI is one of the largest universities in Russia, the leading research and educational center for training bachelors, specialists, masters and researchers in various fields: road, bridges and airport construction, operation and service of transport, economics and management in transport and construction, automated systems of management, traffic safety and management. Now at MADI there are more than 140 doctors of science, 500 full and associate professors, who teach more than 16000 undergraduate, graduate and postgraduate students. Among MADI’s alumni there are government officials and researchers, businessmen and university professors of many countries. For its contribution to training of qualified specialists MADI was awarded Medal of Friendship of Vietnam (1988) and Laos (2015). MADI was the first Russian university to send in 2006 its team to Formula Student competition and from that time student engineering projects have resulted in successful performance at various international competitions. MADI has scientific and educational cooperation programs with foreign universities and 2016 is the second year when some MADI graduates will get double degree of both MADI and Otto Von Guericke University of Magdeburg. MADI’s mission is research and education to ensure availability of high-quality, efficient and safe transport and to increase vehicle-to-population ratio, which is a crucial factor for Russian transport system, providing its integrity.

Submission dates

Submission dates (Abstract and Full Paper at the same time):

Regular submission: 02 August 2021

Late submission (with additional payment): 23 August 2021

Last chance submission (with a BIG extra charge): 15 September 2021

Notification of Acceptance date: 20 September 2021

Author Registration, Final paper Submission and Payment date: 20 October 2021

CALL FOR PAPERS

Payment

CF-01: 10.000 рублей — (Regular submission: 02 August 2021) Регистрация для участников из РФ и стран СНГ — членов IEEE (одна статья на один регистрационный номер IEEE для первого автора)
CF-02: 12.000 рублей — (Regular submission: until 02 August 2021) Регистрация для участников из РФ и стран СНГ
CF-03: 12.000 рублей — (Late submission with additional payment: until 23 August 2021) Регистрация для участников из РФ и стран СНГ — членов IEEE (одна статья на один регистрационный номер IEEE для первого автора)
CF-04: 14.000 рублей — (Late submission with additional payment: until 23 August 2021) Регистрация для участников из РФ и стран СНГ
CF-05: 20.000 рублей — (Last chance submission with a BIG extra charge: until 15 September 2021) Регистрация для участников из РФ и стран СНГ
CF-06: 160 USD – Graduate and postgraduate students as sole authors without co-authors or a team of authors consisting of only students (Regular submission and Late submission)
CF-07: 180 USD – Registration for IEEE members (Regular submission and Late submission, one article per IEEE registration number for the first author)
CF-08: 200 USD – Full registration (Regular submission and Late submission)
CF-09: 300 USD – Last chance submission with a BIG extra charge: until 15 September 2021 — Full registration

Refunds Policy
If the participants request cancellation and refund due to personal reasons, the following refund policy applies.
* 60 days ahead of the conference: 70% of payment refund
* 30-60 days ahead of the conference: 50% of payment refund
* Within 30 days ahead of the conference: no refund

* The organizing committees reserves the right to change the dates and place of the conference due to force majeure.
* Losses thus incurred from the force majeure events shall not be liabled and refunds policy shall not apply as well.

IEEE takes the protection of intellectual property seriously. Accordingly, all submissions are filtered by CrossCheck, a powerful plagiarism detection software system. By submitting your work you agree to allow IEEE to screen your work. When plagiarism is detected, penalties can be severe and may include strict banning from publishing in all IEEE titles. Please consult http://www.ieee.org/documents/opsmanual.pdf Section 8.2.4. to read about IEEE plagiarism policies. For more information please visit: http://www.crossref.org/crosscheck/index.html

About the Event

INTERNATIONAL CONFERENCE «2021 INTELLIGENT TECHNOLOGIES AND ELECTRONIC DEVICES IN VEHICLE AND ROAD TRANSPORT COMPLEX»
(TIRVED-2021)

For 79 years (held since 1942), MADI has been annually holding an international scientific-methodological and research conference «Intelligent technologies and electronic devices in vehicle and road transport complex». During this period, the conference has become larger and more significant. MADI wants to allocate several sections and subsections to a higher level. These areas are: integrated automated control systems in the sectors of the transport and road complex; automation of production processes; organization and traffic safety.

The presentations are made by the scientists and developers from: Russia, Germany, Italy, Sweden, Finland, Poland, Brazil, Belarus, Azerbaijan, Kazakhstan, Kyrgyzstan.

IEEE Region 8, Chair of Russian Section Chapter MTT/ED, IEEE Senior member, Timofey Ya. Shevgunov organizes the work of conference section “Advanced digital intelligent technologies, robotic and big data systems, machine learning and artificial intelligence”.
The conference is held in eight areas, considering the field of intelligent technologies and electronic devices in the road transport complex.

The papers which are discussed at the conference can be divided into the following areas:

Advanced digital intelligent technologies, robotic and big data systems, machine learning and artificial intelligence
Intelligent transport systems and monitoring the state of road network objects
Electronic driver assistance systems. Self-driving cars and electric vehicles
Intelligent and digital systems for design, management and monitoring during the construction and operation of road infrastructure
Innovative technologies and materials in mechanical engineering and modeling of complex mechanical systems
Creation and service of highly efficient road-building, airfield and hoisting-and-transport equipment based on information technologies, robotic and mechatronic systems
Digital technologies in logistics
8. Intelligent technologies for special-purpose vehicles creation and operation

IEEE Russia Section Chair Sergey E. Bankov in cooperation with Chair of MTT/ED/AES Chapter Moscow, Russia, IEEE Senior Member Timofey Shevgunov appoints the conference committee chairs and other key members.

Keywords: Intelligent technologies, Robotic and big data systems, Machine learning and artificial intelligence, Electronic devices in vehicle and road transport complex.

Conference will produce a publication.

Event Conduct and Safety Statement Language:

More details

IEEE believes that science, technology, and engineering are fundamental human activities, for which openness, international collaboration, and the free flow of talent and ideas are essential. Its meetings, conferences, and other events seek to enable engaging, thoughtprovoking conversations that support IEEE’s core mission of advancing technology for humanity. Accordingly, IEEE is committed to providing a safe, productive, and welcoming environment to all participants, including staff and vendors, at IEEE-related events.
IEEE has no tolerance for discrimination, harassment, or bullying in any form at IEEE-related events. All participants have the right to pursue shared interests without harassment or discrimination in an environment that supports diversity and inclusion.
Participants are expected to adhere to these principles and respect the rights of others. IEEE seeks to provide a secure environment at its events. Participants should report any behavior inconsistent with the principles outlined here, to on site staff, security or venue personnel, or to eventconduct@ieee.org.

[свернуть]

Organizers and Sponsors of the Conference

IEEE REGION 8, RUSSIAN SECTION CHAPTER, MTT/ED
INSTITUTE OF RADIO AND INFORMATION SYSTEMS (IRIS)
MOSCOW AUTOMOBILE AND ROAD CONSTRUCTION STATE TECHNICAL UNIVERSITY (MADI)

Contacts

SVETLANA DYMKOVA

Conference Publication Program Coordinator

ds@media-publisher.ru

+7 926-218-8243

Subjects of the conference

The main areas of the conference «Intelligent technologies and electronic devices in vehicle and road transport complex» advanced digital intelligent technologies, robotic and big data systems, machine learning and artificial intelligence; intelligent transport systems and monitoring of the road network state objects; electrical equipment of cars and electric vehicles; digital technologies in logistics; intelligent technologies for the creation and operation of special-purpose vehicles.

Field of interest:

Intelligent technologies
Robotic and big data systems
Machine learning and artificial intelligence
Electronic devices in vehicle and road transport complex

Structure of the technical program committee

Chairman of the Program Committee

1-st Vice-Chairman

2-nd Vice-Chairman

3-rd Vice-Chairman

Program Committee Coordinator

Technical program committee:

Chairman of the Program Committee

Didmanidze O.N., Academician of the Russian Academy of Sciences, Dr. Tech. Sciences, professor

1-st Vice-Chairman of the Program Committee

Karelina M.Yu., Doctor of Technical Sciences, Doctor of Pedagogical Sciences, vice-rector on scientific work, head. Department «Details of Machines and the Theory of Mechanisms», MADI

2-nd Vice-Chairman of the Program Committee

Demyanushko I.V., Doctor of Technical Sciences, professor, head. Department «Construction Mechanics», MADI

3-rd Vice-Chairman of the Program Committee

Prikhodko V.М., Corresponding Member of the Russian Academy of Sciences, Doctor of Technical Sciences, professor, MADI

Program Committee Coordinator

Svetlana S. Dymkova, Conference coordinator, Institute of Radio and Information Systems (IRIS), Member of IEEE Geoscience and Remote Sensing Society and IEEE Circuits and Systems Society

Members of the program committee

Gaidar S.M., Doctor of Technical Sciences, professor, head. Department “Materials Science and Technology of Mechanical Engineering”, Russian State Agrarian University – Moscow Timiryazev Agricultural Academy

Shevgunov T.Ya., IEEE Region 8, Chair of Russian Section Chapter MTT/ED, IEEE Senior member

Ivanov A.M., Doctor of Technical Sciences, professor, head. Department «Automobiles», MADI

Kozlovsky V.N., Doctor of Technical Sciences, professor, head. Department «Theoretical and General Electrical Engineering» Samara State Technical University

Ostroukh A.V.,Doctor of Technical Sciences, professor, MADI

Silyanov V.V., Doctor of Technical Sciences, professor, MADI

Sova A.N. — Doctor of Technical Sciences, professor, head. Department «Transport Facilities», MADI

Trofimenko Yu.V., Doctor of Technical Sciences, professor, head. Department «Engineering ecology» MADI

Shatrov M.G., Doctor of Technical Sciences, professor, head. Department «Heat Engineering and Tractor Engines» MADI

Yashina M.V., Doctor of Technical Sciences, Cand. physical-mat. Sciences, head. Department of «Higher Mathematics» MADI, IEEE member

Girma Gebresenbet, professor, Department of Energy and Technology, Swedish university of agricultural sciences

Dzhumanov R.B. — Ph.D. project engineer of the US Federal Highway Administration (FHWA)

Matkerimov T.Y., Doctor of Technical Sciences, professor, Academician of the Engineering Academy of the Kyrgyz Republic (IA KR), Academician of the International Academy of Pedagogical Education (IANPO), Dean of the Faculty of Transport and Mechanical Engineering of Kyrgyz State Technical University named after I. Razzakov, Bishkek, Kyrgyzstan

Slawomir Makowski, Doctor of Technical Sciences, Coordinator of Cooperation Programs, Associate Professor of the Gdansk Polytechnic University, Gdansk, Poland

Hoang Duc Quang, Ph.D. Southern Branch of the Russian-Vietnamese Tropical Scientific Research Technological Center, Vietnam, Ho Chi Minh City

Georgi Popov, PhD, Assoc. Prof, Technical University – Sofia, Bulgaria

Petar Kolev, Doctor of Technical Sciences, professor, Vice Rector of Research and International Relations, Todor Kableshkov University of Transport, Sofia, Bulgaria

Organizing Committee Members

Efimenko D.B. (Chairman), Doctor of Technical Sciences, professor, acting rector of MADI

Nizamov R.K. (Vice-Chairman) , Doctor of Technical Sciences, professor, rector of Kazan State University of Architecture and Construction

Varlamov O.V. (Vice-Chairman), Doctor of Technical Sciences, Chairman of the Institute of Radio and Information Systems, IRIS, IEEE Member

Vasiliev Y.V., Doctor of Technical Sciences, professor, head. Department «Road building materials» MADI

Vdovin E.A., Cand. Tech. Sciences, Associate Professor, Vice-Rector on Research, head. Department «Roads, bridges and tunnels» of Kazan State University of Architecture and Construction

Evtyukov S.A., Doctor of Technical Sciences, professor, head. Department “Ground Transport and Technological Machines”, SPSUACE

Lazarev Yu.G., Doctor of Technical Sciences, professor, SPbPU

Novikov A.N., Doctor of Technical Sciences, professor, director of the Polytechnic Institute named after N.N. Polikarpov, head. Department «Service and repair of machines», Orel State University

Novikov I.A., Doctor of Technical Sciences, Associate Professor, Director of the Transport and Technological Institute of BSTU named after V.G. Shukhov

Pospelov P.I., Doctor of Technical Sciences, professor, head. Department “Research Methods and Road Design”, MADI

Solntsev A.A., professor, head. Department “Operation of motor transport and car service”, MADI

Сriteria for reviewers

Full Paper are being reviewed (Blind review)

Estimated number of submitted papers: 150

Сriteria for reviewers to evaluate submissions

1. All the papers, submitted for publication by the Program Committee.

2. Review process is anonymous for the reviewers as well as for the author.

3. After reviewing the paper may be rejected, sent to the author for revision, or accepted for publication.

4. The review should include:

— General evaluation of the paper’s content and principal judgment on whether it could be published;

— The specific enumeration of errors in the methodology and tools (if any);

— Suggestions for improving the text.

5. Upon receipt of an unfavorable verdict of the reviewer the paper is discussed on the program committee meeting, which makes a decision on rejection of the article or the need for further review by an independent expert.

6. In case of paper’s rejection, the author sent a notification letter.

7. The procedure for review and approval of articles is from 1 to 2 months.

8. All reviewers are acknowledged experts on the subject of peer-reviewed materials.

We are not using student reviewers.

Every participant pays arrangement fee. Besides, the Conference doesn’t allows distance participation and if the speaker is absent, he or she will lost the ability of the report to the next conference.

[свернуть]

Manuscript requirements

Format

1. All files should be submitted as a Word document.

2. Papers should be between 20000 and 40000 characters (incl. spaces).

3. Paper Title to be submitted in native language and English. A title of not more than eight words should be provided.

4. Author Details (in English and native language)

Details should be supplied on the Article Title Page including:

* Full name of each author

* Position, rank, academic degree

* Affiliation of each author, at the time the research was completed

* Full postal address of the affiliation

* E-mail address of each author

Structured Abstract (in English and native language)

Abstract should be: informative (no general words), original, relevant key content and research findings); structured, concise (between 100 and 150 words).
* Purpose (mandatory)
* Design/methodology/approach (mandatory)
* Findings (mandatory)
* Research limitations/implications (if applicable)
* Practical implications (if applicable)
* Social implications (if applicable)
* Originality/value (mandatory)
It is appropriate to describe the research methods/methodology if they are original or of interest for this particular research. For papers concerned with experimental work describe your data sources and data procession technique.

Describe your results as precisely and informatively as possible. Include your key theoretical and experimental results, factual information, revealed interconnections and patterns. Give special priority in your abstract to new results and long-term impact data, important discoveries and verified findings that contradict previous theories as well as data that you think have practical value.

Conclusions could be associated with recommendations, estimates, suggestions, hypotheses described in the paper.

Use the language typical of research and technical documents to compile your abstract and avoid complex grammatical constructions. The text of the abstract should include key words of the paper.

Keywords (in English and native language)
Please provide up to 5 keywords on the Article Title Page, which encapsulate the principal topics of the paper.

Figures

All figures should be of high quality (300 dpi), legible and numbered consecutively with arabic numerals. All figures (charts, diagrams, line drawings, web pages/screenshots, and photographic images) should be submitted in electronic form preferably in color as separate files, that match the following parameters:

References

References to other publications must be in Harvard style and carefully checked for completeness, accuracy and consistency.

[свернуть]

Publication Ethics Statement

1. All submitted papers are subject to strict peer-review process by at least two international reviewers that are experts in the area of the particular paper.

2. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language.

3. The possible decisions include acceptance, acceptance with revisions, or rejection.

4. If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted. Rejected articles will not be re-reviewed.

5. Papers may be rejected without review if they are obviously not suitable for publication.

6. The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.

7. A paper should contain sufficient detail and references to permit others to replicate the work.

8. Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.

9. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.

10. All sources of financial support for the project should be disclosed.

Copyright

Submitted papers should not have been published before in their current or substantially similar form, or be under consideration for publication with another journal. All authors submitting their works acknowledge that they have disclosed all and any actual or potential conflicts of interest regarding authorship and publication of the work and will indemnify the publisher against any breach of such warranty. For ease of dissemination and to ensure proper policing of use, papers and contributions become the legal copyright of the publisher unless otherwise agreed.

When reproducing tables, figures or excerpts (of more than 400 words) from another source, it is expected that:

1. Authors obtain the necessary written permission in advance from any third party owners of copyright for the use in print and electronic formats of any of their text, illustrations, graphics, or other material, in their manuscript. Permission must also be cleared for any minor adaptations of any work not created by them.

2. If an author adapts significantly any material, the author must inform the copyright holder of the original work.

3. Authors obtain any proof of consent statements.

4. Authors must always acknowledge the source in figure captions and refer to the source in the reference list.

5. Authors should not assume that any content which is freely available on the web is free to use. Authors should check the website for details of the copyright holder to seek permission for re-use.

Verbatim copying

Verbatim copying of more than 10 per cent of another person’s work without acknowledgement, references or the use of quotation marks.

Paraphrasing

Improper paraphrasing of another person’s work is where more than one sentence within a paragraph or section of text has been changed or sentences have been rearranged without appropriate attribution. Significant improper paraphrasing (more than 10 per cent of a work) without appropriate attribution is treated as seriously as verbatim copying.

Re-using parts of a work without attribution

Re-use of elements of another person’s work, for example a figure, table or paragraph without acknowledgement, references or the use of quotation marks. It is incumbent on the author to obtain the necessary permission to reuse elements of another person’s work from the copyright holder.

Self plagiarism

Our requirement is that all authors sign a copyright form that clearly states that their submitted work has not been published before. If elements of a work have been previously published in another publication, the author is required to acknowledge the earlier work and indicate how the subsequent work differs and builds upon the research and conclusions contained in the previous work. Verbatim copying of an author’s own work and paraphrasing is not acceptable and we recommend that research should only be reused to support new conclusions.

We recommend that authors cite all previous stages of publication and presentation of their ideas that have culminated in the final work, including conference papers, workshop presentations and listserv communications.

We take all cases of plagiarism very seriously being aware of the potential impact an allegation of plagiarism can have on a researcher’s career. Therefore, we have procedures in place to deal with alleged cases of plagiarism.

In order for us to take an unbiased approach, we investigate each case thoroughly, seeking clarification from all affected parties. If we are approached by a third party with an allegation of plagiarism, we would always seek a response from the original author(s) or copyright holder(s) before we decide on a course of action. We will not be influenced by other parties and will form our decisions in an unbiased and objective manner.

Editors are not obliged to discuss individual cases of alleged plagiarism with third parties. We reserve the right not to proceed with a case if the complainant presents a false name or affiliation or acts in an inappropriate or threatening manner towards editorial staff.

[свернуть]

Технологии информационного общества 2020

Опубликовано | Автор:

XIV МЕЖДУНАРОДНАЯ ОТРАСЛЕВАЯ
НАУЧНО-ТЕХНИЧЕСКАЯ КОНФЕРЕНЦИЯ

«ТЕХНОЛОГИИ ИНФОРМАЦИОННОГО ОБЩЕСТВА»

18-19 марта 2020 года, Москва, Конгресс-центр МТУСИ

Организаторы:

МОСКОВСКИЙ ТЕХНИЧЕСКИЙ УНИВЕРСИТЕТ СВЯЗИ И ИНФОРМАТИКИ (МТУСИ)
ИНСТИТУТ ИНЖЕНЕРОВ ПО ЭЛЕКТРОТЕХНИКЕ И ЭЛЕКТРОНИКЕ (IEEE)
ИЗДАТЕЛЬСКИЙ ДОМ «МЕДИА ПАБЛИШЕР»

Публикация в сборнике трудов в РИНЦ, участие бесплатное

Язык предоставления материалов: русский или английский (доклад на русском)

Доклады участников научно-технических секций конференции публикуются в сборнике трудов, который размещается на сайте издательского дома Медиа Паблишер и на платформе РИНЦ. Доклады участников научно-методических секций публикуются в сборнике трудов конференции (при объеме представленных материалов от 10 до 15 тысяч знаков) или в журнале «Методические вопросы преподавания инфокоммуникаций в высшей школе» (при объеме представленных материалов более 15 тысяч знаков), который также размещается на сайте издательского дома Медиа Паблишер и на платформе РИНЦ.

Заочное участие в конференции не предусмотрено

Сроки предоставления материалов:

Электронная регистрация и подача материалов для публикации возможна до 20 января 2020 года включительно

Форма электронной регистрации и подачи материалов

РЕГЛАМЕНТ ПРОВЕДЕНИЯ КОНФЕРЕНЦИИ

18 марта: 9⁰⁰ – 10⁰⁰: Регистрация участников

18 марта: 10⁰⁰ – 12³⁰: Пленарное заседание

18 марта: 12³⁰ – 14⁰⁰: Перерыв на обед

18 марта: 14⁰⁰ – 18⁰⁰: Работа секций конференции

19 марта: 10⁰⁰ – 18⁰⁰: Работа секций конференции

ТЕХНИЧЕСКИЕ СЕКЦИИ

СЕКЦИЯ 1. Сети и системы связи
СОПРЕДСЕДАТЕЛИ: Пшеничников Анатолий Павлович, Хромой Борис Петрович

СЕКЦИЯ 2. Теория телетрафика и ее приложения
ПРЕДСЕДАТЕЛЬ: Степанов Сергей Николаевич

СЕКЦИЯ 3. Цифровое телерадиовещание и аудиовидеоинформатика
СОПРЕДСЕДАТЕЛИ: Зубарев Юрий Борисович, Власюк Игорь Викторович

СЕКЦИЯ 4. Системы мобильной связи и радиодоступа, спутниковой связи и вещания
СОПРЕДСЕДАТЕЛИ: Шинаков Юрий Семенович, Чиров Денис Сергеевич

СЕКЦИЯ 5. Устройства передачи, приема и обработки радиосигналов. Электронные компоненты, СВЧ- устройства и АФУ
СОПРЕДСЕДАТЕЛИ: Пестряков Александр Валентинович, Елизаров Андрей Альбертович

СЕКЦИЯ 6. Инфокоммуникационные технологии и защита информации
ПРЕДСЕДАТЕЛЬ: Шелухин Олег Иванович

СЕКЦИЯ 7. Математическое моделирование систем и средств связи
ПРЕДСЕДАТЕЛЬ: Кюркчан Александр Гаврилович

СЕКЦИЯ 8. Функционирование инфокоммуникационных сетей и информационных систем
ПРЕДСЕДАТЕЛЬ: Ефимушкин Владимир Александрович

СЕКЦИЯ 9. Цифровая экономика, управление и бизнес-технологии
ПРЕДСЕДАТЕЛЬ: Салютина Татьяна Юрьевна

СЕКЦИЯ 10. Реклама и связи с общественностью в инфокоммуникациях
ПРЕДСЕДАТЕЛЬ: Кухаренко Елена Геннадьевна

СЕКЦИЯ 11. Интеллектуальные системы в управлении и автоматизации
ПРЕДСЕДАТЕЛЬ: Воронова Лилия Ивановна.СЕКРЕТАРЬ СЕКЦИИ: Воронов Вячеслав Игоревич

МЕТОДИЧЕСКИЕ СЕКЦИИ

СЕКЦИЯ 12. Методические вопросы преподавания гуманитарных, естественнонаучных и общетехнических дисциплин в телекоммуникационных вузах
ПРЕДСЕДАТЕЛЬ: Кораблева Елена Валентиновна

СЕКЦИЯ 13. Методические вопросы преподавания специальных дисциплин в телекоммуникационных вузах
ПРЕДСЕДАТЕЛЬ: Долин Георгий Аркадьевич

СЕКЦИЯ 14. История электросвязи
ПРЕДСЕДАТЕЛЬ: Иванюшкин Роман Юрьевич

СЕКЦИЯ 15. Изучение иностранных языков в техническом вузе
ПРЕДСЕДАТЕЛЬ: Кожевникова Татьяна Витальевна

СЕКЦИЯ 16. Качество преподавания социально-экономических дисциплин и физической культуры личности
ПРЕДСЕДАТЕЛЬ: Брега Александр Васильевич. СЕКРЕТАРЬ СЕКЦИИ: Орлова Елена Юрьевна

СЕКЦИЯ 17. Актуальные аспекты преподавания экономико-управленческих дисциплин в условиях цифрового развития экономики
ПРЕДСЕДАТЕЛЬ: Кузовкова Татьяна Алексеевна

Адрес оргкомитета: 111024, Москва, ул. Авиамоторная, д. 8,«Отдел организации научной работы и публикационной активности», МТУСИ,
офис 512-514, тел.: +7(495) 957-77-43; +7(926) 218-82-43
e-mail: tioconf@media-publisher.ru

Article 2-5 2019

Опубликовано | Автор:

Извините, этот техт доступен только в “Американский Английский”. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

COMPUTER-BASED ANALYSIS OF RELIABILITY AND MAINTENANCE QUALITY OF TELECOMMUNICATION
EQUIPMENT USING MODERN SIMULATION INSTRUMENTS

Alexander A. Lyubchenko, Omsk State Transport University (OSTU), Omsk, Russia, allyubchenko@gmail.com
Evgeny Yu. Kopytov, Omsk State Transport University (OSTU), Omsk, Russia, jenya87@list.ru
Alexander A. Bogdanov, Omsk State Transport University (OSTU), Omsk, Russia, Alex-b0g@yandex.ru

Abstract
Safety of transportation processes is a one of the most important priorities of railway transport. Safety level monitoring is implemented on the basis of the specified parameters control. Modern computer technologies facilitate the estimation of these parameters and, consequently, of the safety level. The research object of the current work is represented by railway telecommunication systems, whereas the study topic is a model for quality estimation of operation and preventive maintenance of railway telecommunication equipment. The objective of the work is the quality analysis of operation and preventive maintenance of telecommunication devices using the proposed model. The following tasks were set: the development of a conceptual model of the operation and preventive maintenance process of railway telecommunication equipment, the development of a simulation model, the implementation of an experiment and analysis of the obtained results. A simulation model of the operation process is constructed in AnyLogic 7 using the discrete event approach and provides the estimation of operation and maintenance quality, as well as the assessment of the achieved availability depending on the factors defining.

Keywords: railway telecommunications, reliability, availability, simulation, AnyLogic.

References

1. Gorelov G.V, Fomin A.F., Volkov A.A., Kotov V.K. and Romashkova O.N. (2013), Teoriya peredachi signalov na zheleznodorozhnom transporte: uchebnik [Theory of signal transmission in rail transport: textbook], UMC GDT, Moscow, Russia.
2. Derzho G.G. (2007), Kolichestvennaya ocenka vklada sistem svyazi v bezopasnost’ tekhnologicheskih processov na zheleznodorozhnom transporte: Monografiya [Quantitative analysis of contribution of telecommunications on technological processes safety in rail transport: monograph], UMC GDT, Moscow, Russia.
3. Rosstandart (2009), GOST R 53111-2008: Ustojchivost’ funkcionirovaniya seti svyazi obshchego pol’zovaniya. Trebovaniya i metody proverki [GOST R 53111-2008: Operation stability of public communication networks. Requirments and test procedures], Standartinform, Moscow, Russia.
4. Kotov V.K., Antonec V.R., Labeckaya G.P. and Shmytinskij V.V. (2012), Nauchno-metodicheskie osnovy upravleniya nadezhnost’yu i bezopasnost’yu ehkspluatacii setej svyazi zheleznodorozhnogo transporta: monografiya [Scientific methodical basics of reliability and safety control of the telecommunication networks operation in railway transport: monograph], UMC GDT, Moscow, Russia.
5. Sapoghnikov V.V. SapoghnikovVl.V. and Shamanov V.l. (2003), Nadezhnost’ system zheleznodoroghnoy avtomatiki. telemehaniki i svayzi [Reliability of railway automation, telemechanics and communication systems), Marshrut, Moscow, Russia.
6. Yakubovich A.N. and Yakubovich I.A. (2016), «Efficient algorithm for numerical implementation of random variables in statistical modeling of technical systems reliability», Intellekt. Innovatsii. Investitsii, no 8, pp. 84-89.
7. Yakubovich A.N. and Yakubovich I.A. (2016), «The determination of the reliability of transport systems and their elements using mathematical modelling», Gruzovik, no. 7, pp. 39-44.
8. Yakubovich A.N., Yakubovich I.A. and Rassokha V.I. (2016), «Reliability evaluation of transport systems by statistical modeling methods (analytical review)», Intellekt. Innovatsii. Investitsii, no. 1, pp. 89-94.
9. Maksimey I.V., Sukach E.I., Giruts P.V. and Erofeeva E.A. (2008), «Simulation Modeling of probabilistic characteristic of railway network operation», Mathematical machines and systems, no. 4, pp. 147-153.
10. Sukach E.I. (2009), «Automatization of research processes of organization variants for transport flows movement of railroad network», Mathematical machines and systems, no. 4, pp. 161-168.
11. Kokurin I.M. and Kudryavtsev V.A. (2012), «Estimation of Railway Line Capacity Based on Imitation Modeling the Transportation Processes», Proceedings of Petersburg Transport University, no 2, pp. 18-22.
12. Alekseev S.I., Berezhnoy V.V. and Soroka R.I. (2011), «Imitated-animated simulation of the basic technological processes the Murmansk transport hub», Evrazijskoe prostranstvo: prioritety social’no-jekonomicheskogo razvitija. Materialy Mezhdunarodnoj nauchno-prakticheskoj konferencii [Eurasian area: priorities of socio-economic development. Proc. of the international conference]. Moscow, Russia, vol. 1, pp. 28-36.
13. Tikhmenev A.N. and Zhadnov V.V. (2013), «Reliability prediction structural-difficult electronic devices by methods of imitating modelling», Quality. Innovation. Education, no. 3, pp. 50-56.
14. Chernov A.V., Guda A.N., Chubeyko S.V. and Butakova M. A. (2015), «Software realiability evaluation by discrete-event simulation methods», Programmnye Produkty i Sistemy, no. 4, pp. 158-165. DOI: 10.15827/0236-235X.112.158-165.
15. Yakimov I.M., Kirpichnilov A.P. and Mokshin V.V. (2014), «Complex systems simulation in AnyLogic», Herald of Kazan Technological University, vol. 17, no. 13, pp. 352-357.
16. Lyubchenko A.A., Bartosh S.V., Smirnov V.A. and Castillo P. ?. (2016), «Discrete event simulation model of railway junction in AnyLogic», Dynamics of Systems, Mechanisms and Machines, vol. 4, no. 1, pp. 87-92.
17. Lyubchenko A.A. (2010), «Application of simulation for determination of probabilistic features of integrated reliability indices of radio systems», Nauka i sovremennost’-2010. Materialy pjatoj mezhdunarodnoj nauchno-prakticheskoj konferencii [Science and Modernity-2010. Proc. of the international conference]. Novosibirsk, Russia, vol. 2, pp. 246-251.
18. Baran V.I. and Baran E.P. (2016), «Forecasting the reliability of elements of information systems using Anylogic 7 tools», Vestnik of the Russian University of Cooperation, no. 1, pp. 8-10.
19. Merkuryeva G. and Bolshakovs V. (2010), «Vehicle schedule simulation with AnyLogic», Computer Modelling and Simulation, Cambridge, England, pp. 169-174. Doi: 10.1109/UKSIM.2010.38.
20. Rakhmangulov A.N. and Mishkurov P.N. (2012) «Special aspects of railroad station working method simulation model development within AnyLogic system», Sbornik nauchnyih trudov SWORLD, vol. 2, no. 4, pp. 7-13.
21. Lutchenko S.S. and Kopytov E.Y. (2010), «Simulation processes maintenance radio stations in Anylogic», Izvestia Transsiba, no. 2, pp. 86-92.
22. Obukhov P.A. and Nikolaev A.B. (2014), «Development of Simulation Models in Anylogic Software for the Study of the Efficiency of Computer Networks», Automation and Control in Technical Systems, no. 4(12), pp. 71-81.
23. Popov A.A. and Yablokova M.M. (2016), «Optimization of computer network structure using AnyLogic simulation», Information technologies. Radioelectronics. Telecommunications, no. 6-2, pp. 181-190.
24. Goncharenko G.I. and Sorokina M.A. (2006), «A methodology of conceptual model specification for a designed system», Izvestia TRTU, no 10 (65), pp. 26-29.
25. About approval of the procedure of effort estimation of regional communication centers (for the calculus of labor efficiency of the employees, occupied in transportation), available at: https://jd-doc.ru/2012/mart-2012/1888-ot-7-marta-2012-g-n-478r, (Accessed 5 March 2019).

Information about authors:
Alexander A. Lyubchenko, Candidate of Engineering Sciences, associate professor, Department of Telecommunications, radio system and networks, Omsk State Transport University (OSTU), Omsk, Russia
Evgeny Yu. Kopytov, Candidate of Engineering Sciences, associate professor, Department of Telecommunications, radio system and networks, Omsk State Transport University (OSTU), Omsk, Russia
Alexander A. Bogdanov, Student, Department of Telecommunications, radio system and networks, Omsk State Transport University (OSTU) Omsk, Russia

Опубликовано | Автор:

Извините, этот техт доступен только в “Американский Английский”. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

Conference title: 2020 Systems of signals generating and processing in the field of on board communications

From 19 to 20 March 2020, Moscow, Russia

Moscow Technical University of Сommunications and Informatics

About the Event

The international scientific and engineering conference “Information Society Technologies” has been held since 1975. For 47 years of work the conference has become a widely known forum for specialists of the field.

As part of the conference the reports on the direction «Systems of signals generating and processing in the field of on board communications» were placed according to the sections. Due to the significantly increasing of the interest and the level of the participants’’ presented papers in this field, by the program committee was made a decision to allocate this chapter as a new original international scientific conference starting with the 2018.

The main areas of the conference «Systems of signals generating and processing in the field of on board communications» include modern digital transportation systems design and technical operation, radio waves propagation, transmitting, receiving and processing signals in television and radio broadcasting devices, information technologies in transport.

The presentations are made by the scientists and developers from 12 countries: Russia, Germany, Finland, Belarus, Ukraine, Azerbaijan, Armenia, Kazakhstan, Uzbekistan, China, Lebanon and Mongolia.

IEEE Region 8, Chair of AP/LEOS Moscow Chapter, Vice-chair of MTT/ED/AES Moscow Chapter Vadim A. Kaloshin is the Chairman of the Technical Program Committee. He organizes the work of the conference sections «Antennas and Radio Waves Propagation» and «Navigation and Mathematical Algorithms of an Object Space Orientation».

Branch Director of the IEEE Worldwide Limited in the Russian Federation and Scientific Secretary of Russian (Moscow) IEEE Circuits and Systems (CAS04) Chapter Roman Y. Ivanyushkin promotes this conference among the Engineers in the field of Telecommunications. He also organizes the work of the conference Chapter «Radiofrequency Applications».

IEEE Chair of Russian Section Chapter, MTT/ED and Chairman of Russian Branch IEEE Circuits and System Society take part in the work of the other conference sections and make presentations at the plenary session of the conference.

The papers which are discussed at the conference can be divided into the following chapters:

1. Antennas and Radio Waves Propagation

2. Navigation and Mathematical Algorithms of an Object Space Orientation.

3. Radiofrequency Applications.

4. Wire and Optical Communication and Control Systems.

5. Intelligent Transport Systems

Conference will produce a publication.

Organizers

Moscow Technical University of Сommunications and Informatics

Location

Moscow Technical University of Сommunications and Informatics

111024, Moscow, Aviamotornaya str., 8A

Contacts

address to send materials: boardconf@media-publisher.ru

Ms Svetlana Dymkova

ds@media-publisher.ru

+7 926-218-8243

Ms Elena Khasianova

ehasyanova@gmail.com

+ 7 915-356-1051

Mr Oleg Varlamov

Doctor of Science (Engineering), Head of Scientific Work and Publication Activity Department in Moscow Technical University of Сommunications and Informatics

vov@mtuci.ru

+7-915-344-2086

Subjects of the conference

The main areas of the conference «Systems of signals generating and processing in the field of on board communications» include modern digital transportation systems design and technical operation, radio waves propagation, transmitting, receiving and processing signals in television and radio broadcasting devices, information technologies in transport.

Field of interest:

Components, Circuits, Devices and Systems

General Topics for Engineers

Signal Processing and Analysis

Structure of the technical program committee

Chairman of the Program Committee

Vice-Chairman of the Program Committee

Program Committee Coordinator

Technical program committee:

Chairman of the Program Committee

Vadim A. Kaloshin – Doctor of Sciences, IEEE Region 8, Chair of AP/LEOS Moscow Chapter, Vice-chair of MTT/ED/AES Moscow Chapter

1-st Vice-Chairman of the Program Committee

Roman Y. Ivanyushkin – PhD, Associate Professor of Moscow Technical University of Сommunications and Informatics. Branch Director of the IEEE Worldwide Limited in the Russian Federation. Scientific Secretary of Russian (Moscow) IEEE Circuits and Systems (CAS04) Chapter

2-nd Vice-Chairman of the Program Committee

Oleg V. Varlamov – Doctor of Sciences (Engineering), Head of the Department of Scientific Work and Publication Activity of the Moscow Technical University of Сommunications and Informatics

Program Committee Coordinator

Elena R. Khasianova – Research Scientist of Moscow Technical University of Telecommunications and Informatics, secretary of Synchronyzation Devices Chapter of The Russian Scientific-technical Society of Radio engineering, Electronics and Telecommunications named after A.S. Popov

Members of the program committee

Sergey E. Bankov – Doctor of Science (Engineering), Chairman IEEE Russia Section, Institute of Radio-engineering and Electronics by the Russian Academy of Science

Oleg G. Morozov – Doctor of Science (Engineering), Kazan National Research Technical University named after A. N. Tupolev – KAI (IEEE member)

Yuriy S. Shinakov – Doctor of Science (Engineering), Head of Radio Engineering Systems Department, Professor of Moscow Technical University of Telecommunications and Informatics (IEEE member)

Alexander V. Pestryakov – Doctor of Science (Engineering), Dean of Radio and Broadcasting Faculty, Professor of Moscow Technical University of Сommunications and Informatics

Submission dates

Abstract submission date: 11 November 2019

Full paper submission date: 20 November 2019

Notification of acceptance date: 20 December 2019

Final paper submission date: 20 January 2020

Сriteria for reviewers

Full Paper are being reviewed (Blind review)

Сriteria for reviewers to evaluate submissions

1. All the papers, submitted for publication by the Program Committee.

2. Review process is anonymous for the reviewers as well as for the author.

3. After reviewing the paper may be rejected, sent to the author for revision, or accepted for publication.

4. The review should include:

— General evaluation of the paper’s content and principal judgment on whether it could be published;

— The specific enumeration of errors in the methodology and tools (if any);

— Suggestions for improving the text.

5. Upon receipt of an unfavorable verdict of the reviewer the paper is discussed on the program committee meeting, which makes a decision on rejection of the article or the need for further review by an independent expert.

6. In case of paper’s rejection, the author sent a notification letter.

7. The procedure for review and approval of articles is from 1 to 2 months.

8. All reviewers are acknowledged experts on the subject of peer-reviewed materials.

We are not using student reviewers.

Every participant pays arrangement fee. Besides, the Conference doesn’t allows distance participation and if the speaker is absent, he or she will lost the ability of the report to the next conference.

[свернуть]

Manuscript requirements

Format

1. All files should be submitted as a Word document.

2. Papers should be between 15000 and 20000 characters (incl. spaces).

3. Paper Title to be submitted in native language and English. A title of not more than eight words should be provided.

4. Author Details (in English and native language)

Details should be supplied on the Article Title Page including:

* Full name of each author

* Position, rank, academic degree

* Affiliation of each author, at the time the research was completed

* Full postal address of the affiliation

* E-mail address of each author

Structured Abstract (in English and native language)

Abstract should be: informative (no general words), original, relevant key content and research findings); structured, concise (between 100 and 150 words).
* Purpose (mandatory)
* Design/methodology/approach (mandatory)
* Findings (mandatory)
* Research limitations/implications (if applicable)
* Practical implications (if applicable)
* Social implications (if applicable)
* Originality/value (mandatory)
It is appropriate to describe the research methods/methodology if they are original or of interest for this particular research. For papers concerned with experimental work describe your data sources and data procession technique.

Describe your results as precisely and informatively as possible. Include your key theoretical and experimental results, factual information, revealed interconnections and patterns. Give special priority in your abstract to new results and long-term impact data, important discoveries and verified findings that contradict previous theories as well as data that you think have practical value.

Conclusions could be associated with recommendations, estimates, suggestions, hypotheses described in the paper.

Use the language typical of research and technical documents to compile your abstract and avoid complex grammatical constructions. The text of the abstract should include key words of the paper.

Keywords (in English and native language)
Please provide up to 5 keywords on the Article Title Page, which encapsulate the principal topics of the paper.

Figures

All figures should be of high quality, legible and numbered consecutively with arabic numerals. All figures (charts, diagrams, line drawings, web pages/screenshots, and photographic images) should be submitted in electronic form preferably in color as separate files, that match the following parameters: